FloSet Contract

Whether mechanical or electric, FloSet Contract is designed to incorporate any Control valve. FloControl will provide a FlowCon Flushing By-Pass on 40mm centres5 modes of operation including full isolation of the coil and high Kvs by-pass for full velocity system flush; a FlowCon Strainer with integrated Test Point and fitted with Combined PT Plug & Drain in the Flow Branch (optional); a FlowCon Flow Venturi Metering Station (+ 5% accuracy), with integrated Test Point and fitted with Combined PT Plug & Drain in the Return Branch; Union Solder FCU Connections for direct mounting onto the Fan Coil Unit over the extended drip tray and female threaded system-side connections.

FloSet Contract
  • Accommodates any PICV of choice
  • Static pressure of the bypass assembly 25 Bar maximum (PICV dependent)
  • Accurate flow measurement at the terminal unit
  • Drain & Test Points in the flow and return
  • Line sizes DN15-20
  • Fully tested, labelled, cross-referenced to schedule, with QR code link to technical data
  • Vertical & horizontal configuration
  • Union connections on all joints