PN10 Thermal Balancing Valve
Sizes: 15 – 22mm Female Threaded Connections
Temperature range: 0 – 85°C
Material: Forged Brass
Manual By-Pass for high temperature purge
Actuated By-Pass option available
DZR
ISO 6957 Corrosion Proof
Temperature rating: -15° – +120°
1/4″ -4″ standard female threaded connection ISO 7/1 with alloy steel lever or extended handle, pressure rating: PN20 -PN25
15mm – 54mm compression fitting, pressure rating: PN16
PN10 Thermostatic Mixing Valve
Sizes: 15 – 22mm Compression Connections
Fail Safe Design
In accordance with BS 7942:2000 & National Health Service specification
D08
Also meet BS EN 1111: 1999 &
BS EN 1287:1999
Material: DZR Brass
Maximum Inlet Temperature: 85°C
PN25 Pressure Regulating Valve
Inlet pressure: 25 Bar
Outlet pressure: 1 – 6 Bar
Sizes:
Supplied with or without Pressure Gauge
PN15 Flow Regulating Ball valve
Temperature range 0°C to 110°C
Sizes: 15mm Compression
Material: Brass
Strainer mesh size: 400μm
Pressure differential pressure range: 15 – 200 kPa
PN16 max. Y Type Strainer
Temperature range 0°C to 110°C
Sizes: 15 – 28mm Compression
Material: Brass
Strainer mesh sizes:
PN10 max. Y Type Strainer
Temperature range 0°C to 120°C
Sizes: 1⁄2” – 4” Female Threaded Connections
Material: 1⁄2” – 1” Brass; 11⁄4” – 4” Bronze
Strainer mesh size:
PN10 WRAS approved Single Check Valve
Temperature range: 0°C to 90°C
Rapid response action
Can be installed in any orientation
Material: DZR Brass Construction
Sizes: 1⁄2” – 2” Female Threaded
PN10 WRAS approved Single Check Valve
Temperature range: 0°C to 85°C
Rapid response action
Can be installed in any orientation Material: DZR Brass Construction
Sizes: 15 – 28mm Compression Connections
PN16 Double Check Valve
Temperature range: 0°C to 85°C
Conforms to: BS6282 Part 1
Material: DZR Brass
Connections Sizes: Female Threaded 1⁄2” – 2”
Suitable for installation in any orientation
PN10 WRAS approved Automatic Air Vent
Temperature range: 0°C to 120°C
Max percentage of glycol: 30%
Material: Brass construction
Sizes: 3⁄8” – 1” Male Threaded
PN16 Max. WRAS approved Service Ball Valve
Conforms to CEN/TS 13547
Maximum Temperature: Dependent on working pressure
Chrome Plated DZR Brass construction
Sizes: 15 & 22mm
Connections: Compression complying with BS EN 1252 – 2
Connections:
PN16 Max. WRAS approved Threaded Ball Valve
Conforms to CEN/TS 13547
Maximum Temperature: Dependent on working pressure
Nickel Plated Brass construction
Pressed Steel Lever Handle
Sizes: 15 – 54mm
Connections: Compression complying with BS EN 1252 – 2
PN16 WRAS approved Threaded Ball Valve
Conforms to CEN/TS 13547
Maximum Temperature: 120°C
Nickel Plated Brass Construction
Pressed Steel Lever Handle
Sizes: 1⁄2” – 2”
Connections: Parallel to BS EN ISO 228-1